SuperServer 4029GP-TRT2

1. Single Root System for excellent
    GPU peer to peer communication
    with sufficient CPU to GPU throughput
2. Dual Socket P (LGA 3647) support
    2nd Gen Intel® Xeon® Scalable
    processors (Cascade Lake/Skylake)‡
3. 24 DIMMs; up to 6TB 3DS ECC
    DDR4-2933MHz† RDIMM/LRDIMM,
    Supports Intel® Optane™ DCPMM††
4. 11 PCI-E 3.0 x16 (FH, FL) slots
    1 PCI-E 3.0 x8 (FH, FL in x16 slot)
5. Up to 24 Hot-swap 2.5" drive bays;
    8x 2.5" SATA drives supported
    with included H/W, 2x 2.5" NVMe
    drives supported with included H/W,
    1 NVMe based M.2 SSD
6. 2x 10GBase-T LAN ports via Intel C622
7. 8 Hot-swap 92mm RPM cooling fans
8. 2000W (2+2) Redundant Power
    Supplies Titanium Level (96%+)

Nhà sản xuất: Supermicro
Thời gian bảo hành : 3 Year
Hỗ trợ kỹ thuật 24/7
142.500.000 ₫ (Giá chưa bao gồm VAT)
Product SKUs
 
SYS-4029GP-TRT2
  • SuperServer 4029GP-TRT2 (Black)
 
Motherboard
 

Super X11DPG-OT-CPU
 
Processor
 
CPU
  • Dual Socket P (LGA 3647)
  • 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors,
    3 UPI up to 10.4GT/s
  • Support CPU TDP 70-205W
Cores
  • Up to 28 Cores
Note BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
 
GPU
 
Supported GPUs
  • 10 Double-Width/Single-Width PCI-E 3.0 x16 Card (Full Height Full Length)
  • NVIDIA V100, P40, T4, Quadro, RTX
  • Supports both active and passive cooled GPUs
  • Compatible GPU list
CPU-GPU Interconnect
 
System Memory
 
Memory Capacity
  • 24 DIMM slots
  • Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
  • Supports Intel® Optane™ DCPMM††
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.
 
On-Board Devices
 
Chipset
  • Intel® C622 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers
  • Dual Port 10GbE from C622
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • ASPEED AST2500 BMC
 
Input / Output
 
SATA
  • 8 SATA3 (6Gbps) ports
LAN
  • 2 RJ45 10GBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB 3.0 ports (rear)
Video
  • 1 VGA Connector
COM Port
  • 1 COM port (header)
 
System BIOS
 
BIOS Type
  • AMI 32Mb SPI Flash ROM
 
Management
 
Software
 
PC Health Monitoring
 
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
 
Chassis
 
Form Factor
  • 4U Rackmountable
  • Rackmount Kit (MCP-290-00057-0N)
Model
  • CSE-418GTS-R4000BP2
 
Dimensions
 
Height
  • 7.0" (178mm)
Width
  • 17.2" (437mm)
Depth
  • 29" (737mm)
Weight
  • Net Weight: 65.5 lbs (29.7 kg)
  • Gross Weight: 100 lbs (45.3 kg)
Available Colors
  • Black
 
Drive Bays / Storage
 
Hot-swap
  • Up to 24x 2.5" SAS/SATA drive bays
  • 8x 2.5" SATA supported natively
  • 2x 2.5" NVMe supported natively
M.2
  • 1 NVMe based M.2 SSD
  • Form Factors: 2260, 2280, 22110
 
Expansion Slots
 
PCI-Express
  • 11 PCI-E 3.0 x16 (FHFL) slots - supporting up to 10 GPUs
  • 1 PCI-E 3.0 x8 (FH, FL, in x16) slot
 
System Cooling
 
Fans
  • 8 Hot-swap 92mm cooling fans
 
Power Supply
2000W Redundant Power Supplies with PMBus
Total Output Power
  • 1000W: 100 – 120Vac
  • 1800W: 200 – 220Vac
  • 1980W: 220 – 230Vac
  • 2000W: 230 – 240Vac
  • 2000W: 200 – 240Vac (UL/CUL only)
Dimension
(W x H x L)
  • 73.5 x 40 x 265 mm
Input
  • 100-120Vac / 12.5-9.5A / 50-60Hz
  • 200-220Vac / 10-9.5A / 50-60Hz
  • 220-230Vac / 10-9.8A / 50-60Hz
  • 230-240Vac / 10-9.8A / 50-60Hz
  • 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V
  • Max: 83.3A / Min: 0A (100-120Vac)
  • Max: 150A / Min: 0A (200-220Vac)
  • Max: 165A / Min: 0A (220-230Vac)
  • Max: 166.7A / Min: 0A (230-240Vac)
  • Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • 25 Pairs Gold Finger Connector
CertificationTitanium Level96%  Titanium Level
  Test Report ]
 
Operating Environment
 
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
       -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List 
 
Parts List - (Items Included)
 
 Part NumberQtyDescription
Motherboard / ChassisMBD-X11DPG-OT-CPU
 
MBD-X10DRG-O-PCIE
 
CSE-418GTS-R4000BP2
1
 
1
 
1
Super X11DPG-OT-CPU Motherboard
 
Super X10DRG-O-PCIE Motherboard
 
CSE-418GTS-R4000BP2 Chassis
BackplaneBPN-SAS3-216A-N4124-port 2U SAS3 12Gbps hybrid backplane, support up to 20x 2.5-inch SAS3/SATA3 HDD/SSD and 4x SAS3/SATA3/NVMe Storage Devices
Cable 1CBL-0449L2HDD power extension for X8OBN, special 8 pin to 4 HDD. 45cm. 18AWG
Cable 2CBL-PWEX-10288GPU,2x4F/CPU to 2x4F/CPU,P4.2, 30CM,16AWG, 10A/pin, -40~105C
Cable 3CBL-SAST-0507-012MINI SAS HD-MINI SAS,6G,INT,80CM,SB,28AWG
Cable 4CBL-SAST-09722OcuLink V. 1.0 source to MiniSAS HD,INT,PCIe, 70CM,34AWG,RoH
PartsMCP-130-41802-0B1Black plastic palm cover for X10DRG-O-PCIE
Riser CardRSC-X9DRG-O4RSC-X9DRG-O
Heatsink / RetentionSNK-P0068APS422U Active CPU Heat Sink Supporting Narrow Bolster Plate Mounting Mechanism for X11 Purley Platform
Power SupplyPWS-2K05A-1R41U 2000W Redundant Titanium Power Supply W/PMbus 73.5x40x265mm,RoHS/REACH
FAN 1FAN-0151L4892x92x38 mm, 11.5K RPM, SC418G Middle Fan w/ Housing,RoHS/REACH,PBF
Rear WindowMCP-240-84802-0N121 slot rear window for SC418X
 
Optional Parts List
 
 Part NumberQtyDescription
0.5U LIDMCP-230-41803-0N1Top cover for GTX card support
1U LIDMCP-230-41806-0N1Top cover for NVLINK BRIDGE support
2.5" NVMe Drive TraysMCP-220-00121-0B
 
MCP-220-00167-0B
 
1 per driveBlack Gen-3 2.5" NVMe drive tray. Orange tab with lock
 
Black Gen-3 2.5" NVMe drive tray. Orange tab with lock, Tool-less
GPU Dummy TrayMCP-240-00096-0N1GPU / Add-on Card Dummy Assembly (2 Slots)
GPU CablesCBL-PWEX-06651 per GPU***GPU power cable (for NVIDIA P40, M40, M60, AMD MI25). 8pin FEMALE BLK to 8pin FEMALE WHT. 30cm 18AWG.
CBL-PWEX-10171 per GPUGPU power cable (for NVIDIA QUADRO, GTX). 8pin FEMALE CPU BLUE to 2x 6pin FEMALE / 2x 1pin FEMALE. 20cm 16AWG/20AWG.
CBL-PWEX-1040*1 per GPUGPU power cable (for NVIDIA QUADRO, GTX). 8pin MALE CPU to 2x 6pin FEMALE / 2x 1pin FEMALE. 5cm 20AWG/16AWG.
CBL-PWEX-1028**1 per GPUGPU power cable (for NVIDIA TESLA V100). 8pin FEMALE CPU BLUE to 8pin FEMALE CPU BLUE. 30cm 20AWG/16AWG.
Note:* Use with CBL-PWEX-1028
** 8 qty. included with each system
*** 2 qty. required for each MI25
Storage Control Cards and CablesAOC-S3008L-L8I21Broadcom 3008 STD LP 8 internal ports, 12Gb/s per port - SAS HBA Adapter Card, RAID 0,1,1E,10
AOC-S3008L-L8E21Broadcom 3008 STD LP 8 internal ports, 12Gb/s per port - SAS HBA Adapter Card, HBA only
AOC-S3108-H8IR2, 4, 81Broadcom 3108 STD LP 8 internal ports, 12Gb/s per port - SAS HBA Adapter Card, RAID 0,1,5,6,10,50,60
AOC-S3108L-H8IR-16DD4, 81Broadcom 3108 STD LP 8 internal ports, 12Gb/s per port - SAS HBA Adapter Card, RAID 0,1,5,6,10,50,60. Maximum 16 HDD support with expander backplane
AOC-SAS3-9361-16I3, 51Broadcom 9361 STD LP 16 internal ports, 12Gb/s per port - SAS HBA Adapter Card, RAID 0,1,5,6,10,50,60.
AOC-SAS3-9361-24I5, 61Broadcom 9361 STD LP 24 internal ports, 12Gb/s per port - SAS HBA Adapter Card, RAID 0,1,5,6,10,50,60.
CBL-SAST-05312n/a
BTR-TFM4G-LSI0041871LSI Remote CVKit with DVFlash Module CVFM04 for 9361 and 9380 Controller Series
BTR-TFM8G-LSICVM021LSI Supercap w/ 8GB CV + 24" cable for LSI S3108-H8IR.
Optional installation kit:
- MCP-240-00127-0N
- BKT-BBU-BRACKET-05
MCP-240-00127-0N1Remote Mounting Bracket for Supercap. Installs in 2.5" drive tray.
BKT-BBU-BRACKET-051Remote Mounting Board for Supercap. Full Height mounting bracket. Low Profile mounting bracket also included.
BPN-SAS3-216EL11SAS3 12Gb/s Single Expander Backplane with x24 2.5" SATA/SAS HDD/SSD.
Note:2. Requires x2 CBL-SAST-0531
3. Requires x4 CBL-SAST-0531
4. Use BTR-TFM8G-LSICVM02 for Supercap
5. Use BTR-TFM4G-LSI00418 for Cache Vault
6. Requires x6 CBL-SAST-0531
7. Requires BKT-BBU-BRACKET-05
8. Optional BPN-SAS3-216EL1 Expander Backplane support. Will lose x2 U.2 NVMe support
Network and CablesAOC-STG-i4S14 Port 10G SFP+ PCI-E x8 Ethernet card. Based on Intel X710-AMI
AOC-STG-i2T12 Port 10G RJ45 PCI-E x8 Ethernet card. Based on Intel X540
AOC-S25G-B2S12 Port 25G SFP28 PCI-E x8 Ethernet card. Based on Broadcom BCM57414
AOC-S25G-M2S12 Port 25G SFP28 PCI-E x8 Ethernet card. Based on Mellanox ConnectX-4 LX EN
AOC-MCX4121A-ACAT12 Port 25G SFP28 PCI-E X8 Ethernet card. Based on Mellanox ConnectX-4 LX EN
AOC-S40G-I1Q11 Port 40G QSFP+ PCI-E X8 Ethernet card. Based on Intel X710
AOC-S40G-I2Q12 Port 40G QSFP+ PCI-E X8 Ethernet card. Based on Intel X710
AOC-MCX456A-ECAT12 Port 100G QSFP28 PCI-E X16 EDR IB card. Based on Mellanox Connect-4 VPI
AOC-MCX556A-ECAT12 Port 100G QSFP28 PCI-E X16 EDR IB card. Based on Mellanox Connect-5 VPI
CBL-NTWK-0944-MS28C30M1Ethernet Cable, SFP28,28GbE,PASSIVE,30 AWG,3M,Mellanox
CBL-NTWK-0944-MS28C20M1Ethernet Cable, SFP28,28GbE,PASSIVE,30 AWG,2M,Mellanox
AOC-E10GSFPSR1Ethernet Transceiver, SFP+ 1000Base-SX / 10GBase-SR
CBL-NTWK-0446-011Ethernet Cable, QSFP, 40GbE, PASSIVE, 28 AWG, 3M
CBL-NTWK-0942-MQ28E20M1IB Cable, QSFP28, 100GbE, PASSIVE, 28 AWG, 2M
Global Services & SupportOS4HR3/2/1
 
OSNBD3/2/1
-
 
-
3/2/1-year onsite 24x7x4 service
 
3/2/1-year onsite NBD service
SoftwareSFT-OOB-LIC  1OOB Management Package (per node license)
SoftwareSFT-DCMS-Single1DataCenter Management Package (per node license)
Xem thêm